Soluvar Gloss Varnish

Archival removable gloss varnish for acrylics



Protect your acrylic and oil pieces with a transparent, gloss acrylic layer which can be removed to clean away surface dirt.

8oz/237ml | 32oz/946ml
What it does
  • Mineral spirit-based varnish adds a gloss sheen, protects and resists dirt retention
  • Dries clear to a flexible, non-tacky, hard surface
  • Increases brightness and color saturation
  • Adjusts and unifies surface sheen
  • Improves surface durability - ideal when shipping or exhibiting
  • Protects colors from UV light damage
  • Resists discoloration - yellowing and fogging - caused by humidity, heat and UV
  • Depending on the substrate it allows surface moisture to pass through and breathe
  • Allows for easy cleaning without fear of damaging the acrylic paint film
  • Has excellent levelling properties - will not hold brushmarks
  • Use on flexible or rigid supports
  • Designed for interior and exterior use
How to use it


  • Before varnishing ensure paint surface is fully dry - 72 hours-two weeks for acrylics, depending on thickness, and 6-12 months for oils
  • Ensure your space is well ventilated and dirt and dust-free
  • Place the artwork flat on a surface - always varnish horizontally
  • Stir gently before use
  • Can be thinned with up to 25% true mineral spirits
  • Use a wide, flat soft-hair brush/pad/spray
  • Apply 1-2 coats of Gloss Medium as a permanent isolating barrier first and leave to dry for three days
  • Once completely dry, clean the surface with a lint-free rag dampened with mineral spirits
  • Apply 1-2 layers of Soluvar, leaving 24 hours between coats
  • Use long, even strokes, covering the surface top to bottom while moving from one side to the other - don't go over bits you have missed, but leave to dry and then re-varnish area
  • While applying, look for surface bubbles and even them out immediately 


  • Work in a clean, well-ventilated area
  • Wear a dual filter respirator (NIOSH-approved) and neoprene gloves
  • Use a small piece of soft, white, lint-free cloth dampened with true mineral spirits or turps. Lay the cloth on the surface for 15-30 minutes, checking to see if varnish is being dissolved. If it's taking longer, use a higher strength of the spirit and cover the area with plastic to slow down evaporation 
  • After 15-30 minutes, rub the cloth over a small area 1-2 square inches until the Soluvar layer starts to dissolve
  • Using a clean cloth and more solvent, rub the area again to remove residue
  • Working horizontally, continue the same process for the entire area to be cleaned
  • If any paint comes off on the cloth, stop immediately and move onto another area
  • Once completed allow the surface to dry before reapplying a fresh coat of Soluvar
How not to use it
  • Do not shake or vigorously over-brush as this can result in surface bubbles and a foggy, hazy look when dry
  • Don't apply with a roller or sponge brush
  • Don't apply in one thick coat, but several thin coats, to avoid brush marks, drips and cloudiness
  • Don't go back over areas you have already done, as this can cause clouding
  • Don't use odorless mineral spirits, paint removers, ketones or any other harsh solvents


Tips & Techniques

Useful guides for varnishing

Varnish FAQs

Other artists have asked us...

  • Can I use your varnishes on my oil painting?
    You can use all Liquitex Soluvar removable varnishes on oil paintings as these are solvent based. However our permanent varnishes are made with a water-based acrylic formula and are designed only for acrylics. These are not suitable for oil paintings.
  • Why should I use two varnishes when I use Soluvar?
    Gloss Medium provides a buffer coat that protects the paint film against abrasion during future Soluvar removal for cleaning. Soluvar provides final UV varnish protection for the work.
  • What varnish should I use with Liquitex Spray Paint?
    You can use any of our varnishes once your spray paint has been completely dry for at least 24 hours. Our removable Soluvar Matte or Gloss Varnish works well on important pieces. This is an archival varnish which can be removed to clean the surface and is suitable for interior and exterior use. .
Show more FAQs