Menu Back Close
Back

1/2

Professional Soluvar Matte Varnish Spray

SKU:094376945942

Professional acrylic gessoes, mediums, additives and varnishes - to prep your surfaces all the way through to protecting your finished work. Each medium is uniquely formulated to deliver a different result. From gloss gels to experimental texture effects and finishes, each lets you adjust your paint to suit your practice. Varnishes seal and protect finished work from dirt, dust and UV damage.

Size

10.4oz/295g

$30.49

Quantity

MEDIUMS

Use with
Acrylic paints & mediums

check

Oil paints

check

Character

Lightfast & archival

check

Permanent

check

Non-yellowing

check

Flexible & non-cracking

check

Water-resistant when dry

check

Intermixable with all Liquitex materials

check

All our paints are intermixable and water-based, with archival results. Tested and certified at Duke University by the ACMI. Conforms to ASTM D4236

Unfortunately this item cannot be shipped to Canada due to local legal restrictions. Please Contact us if you require a Canadian Safety Data Sheet. Please refer to safety data sheet for safety information

Download safety data sheet

MORE INFO

What it does
  • Mineral spirit-based varnish adds a matte sheen, protects and resists dirt retention
  • Dries clear to a flexible, non-tacky, hard surface
  • Increases brightness and color saturation
  • Adjusts and unifies surface sheen
  • Improves surface durability - ideal when shipping or exhibiting
  • Protects colors from UV light damage
  • Resists discoloration - yellowing and fogging - caused by humidity, heat and UV
  • Depending on the substrate it allows surface moisture to pass through and breathe
  • Allows for easy cleaning without fear of damaging the acrylic paint film
  • Use on flexible or rigid supports
  • Designed for interior and exterior use
How to use it

Application

  • Before varnishing ensure paint surface is fully dry - 72 hours-two weeks for acrylics, depending on thickness, and 6-12 months for oils
  • Ensure your space is well ventilated and dirt and dust-free
  • Place the artwork flat on a surface - always varnish horizontally
  • Apply 1-2 coats of Gloss Medium as a permanent isolating barrier first and leave to dry for three days
  • Once completely dry, clean the surface with a lint-free rag dampened with mineral spirits
  • Apply 1-2 layers of Soluvar, leaving 24 hours between coats
  • Use long, even mists, covering the surface top to bottom while moving from one side to the other

Removal

  • Work in a clean, well-ventilated area
  • Wear a dual filter respirator (NIOSH-approved) and neoprene gloves
  • Use a small piece of soft, white, lint-free cloth dampened with true mineral spirits or turps. Lay the cloth on the surface for 15-30 minutes, checking to see if varnish is being dissolved. If it's taking longer, use a higher strength of the spirit and cover the area with plastic to slow down evaporation
  • After 15-30 minutes, rub the cloth over a small area 1-2 square inches until the Soluvar layer starts to dissolve
  • Using a clean cloth and more solvent, rub the area again to remove residue
  • Working horizontally, continue the same process for the entire area to be cleaned
  • If any paint comes off on the cloth, stop immediately and move onto another area
  • Once completed allow the surface to dry before reapplying a fresh coat of Soluvar
How not to use it
  • Don't apply in one thick coat, but several thin coats, to avoid drips and cloudiness
  • Don't go back over areas you have already done, as this can cause clouding
  • Don't use odorless mineral spirits, paint removers, ketones or any other harsh solvents

YOU MAY ALSO LIKE

Tips & Techniques

Useful guides for varnishing

Guide

Soluvar varnish removal
Guide

Varnishing
Guide

Creating texture

Varnish FAQs

Other artists have asked us...

Show more FAQs