Archival permanent satin
varnish for acrylics
Seal your acrylic work with a transparent, satin acrylic layer which is breathable, permanent and protects against UV damage.
8oz/237ml | 32oz/946ml
8oz/237ml | 32oz/946ml
Acrylic paints & mediums
All acrylic surfaces
Lightfast & archival
Flexible & non-cracking
Water-resistant when dry
Intermixable with all Liquitex materials
What it does
- 100% acrylic polymer varnish adds a satin sheen, protects and resists dirt retention
- Dries clear to a flexible, non-tacky, hard surface
- Increases brightness and color saturation
- Adjusts and unifies surface sheen
- Improves surface durability - ideal when shipping or exhibiting
- Protects colors from UV light damage
- Resists discoloration - yellowing and fogging - caused by humidity, heat and UV
- Depending on the substrate it allows surface moisture to pass through and breathe
- Allows for easy cleaning without fear of damaging the acrylic paint film
- Has excellent levelling properties - will not hold brush marks
- Semi-opaque when wet, transparent when dry
- Use on flexible or rigid supports
- Designed for interior and exterior use
How to use it
- Fully intermixable with all Liquitex products
- As this is permanent, do a patch test first
- Before varnishing ensure paint surface is fully dry (72 hours-two weeks depending on thickness)
- Ensure your space is well ventilated and dirt and dust-free
- Place the artwork flat on a surface - always varnish horizontally
- Stir gently before use
- Use long, even strokes, covering the surface top to bottom while moving from one side to the other - don't go over bits you have missed, but leave to dry and then re-varnish area
- While applying, look for surface bubbles and even them out immediately
- Apply 1-2 thin coats, allowing at least three hours dry time between coats
- If you require more than two layers, first use Gloss Varnish as a base layer and build to your desired thickness, then apply Satin Varnish as your top coat
How not to use it
- Do not shake or vigorously over-brush as this can result in surface bubbles and a foggy, hazy look when dry
- Don't apply with a roller or sponge brush
- Do not thin with water
- Don't apply in one thick coat, but several thin coats, to avoid brush marks, drips and cloudiness
- Don't go back over areas you have already done, as this can cause clouding
- Don't attempt to remove once applied
- Do not use with any non-acrylic media
YOU MAY ALSO LIKE
Tips & Techniques
Useful guides for varnishing
Other artists have asked us...
How should I apply your brush-on Matte Varnish?
We recommend a synthetic bristle brush which you don't use for color or mediums. Keep it reserved just for varnishing and wash it out really well with warm water and soap, once finished.
Is it possible to create a custom satin varnish?
Yes, you can intermix our High Gloss, Gloss, Satin and Matte Varnishes to create your perfect level of sheen.
Why should I varnish my acrylic paintings?
If it's a piece you want to keep, show or preserve, we recommend varnishing. Our varnishes offer physical protection from knocks and dirt, plus an extra layer of UV-light protection. Acrylic varnish also adjusts and unifies the surface sheen, boosts brightness and color saturation.