Water-based acrylic paint is composed of pigment particles dispersed in an acrylic polymer emulsion. There are three main components in any acrylic paint - pigment, binder and vehicle:

  1. Pigment - pigments are granular solids which give paint its color. They are milled to a tiny particle size and do not dissolve, but remain suspended in the paint. Pigments can be organic, inorganic, natural and synthetic. They have little or no affinity for the surface to which they are applied
  2. Binder - a binder is the substance that keeps pigment in place after the paint dries. Acrylic paint has acrylic polymer as its binder and this forms a film after the water has evaporated
  3. Vehicle - this refers to the part of the paint that carries the pigment and binder. Water is the vehicle for water-based acrylic and when combined with the binder, it creates a polymer emulsion. Once the water leaves the system via evaporation or absorption, the paint dries, creating a stable clear polymer film full of trapped colored pigment particles


Acrylic colors dry as a result of water evaporation. Here’s what occurs as pigment, water and acrylic are transformed into a long-lasting paint film:


Squeezed from the tube, or scooped from the jar, acrylic paint is a finely balanced dispersion of pigment in an emulsion of acrylic polymer and water. The water serves to keep the emulsion liquid and acts as a kind of chemical ‘chaperone’, preventing the acrylic polymer particles from getting close and personal and locking together before you're ready


When exposed to the atmosphere, water in the emulsion evaporates, or is absorbed into the painting support. That’s when the acrylic polymer particles come into direct contact and fuse with each other


The clear polymer particles organize themselves into a stable, hexagonal structure, trapping the pigment in place. The result? A paint film which is extremely stable, water-resistant, permanent and vibrant



  • They dry quickly (10-12 minutes for thin applications, longer for thick applications)
  • They flex
  • You can clean them up with water when wet
  • And they're permanent when dry
  • They come in a range of consistencies and formats to suit you
  • They stick to almost any surface
  • They work across styles and techniques - from experimental applications to traditional painting styles
  • They are low odor, with no fumes and are non-flammable
  • You can change their character with mediums 


Discover the art of painting with our expert tips. Learn about the do's and don'ts including thinning, transparency, and flexibility.

Acrylics should never be thinned with more than 25% water. Why? Too much water will upset the balance and spread the acrylic polymer too thinly so the molecules can't reconnect properly to form a stable film. Instead you should dilute with an acrylic medium, which is essentially the same as the paint but without the color pigment. This way you are adding more of the acrylic/water emulsion to keep the formula and film stable.

When wet, an acrylic/water emulsion has a slightly milky appearance and becomes transparent as the paint dries. This milkyness slightly lightens the value of the color. As water leaves the emulsion, and the binder clarifies, the value of the color darkens. This color change is commonly called the wet-to-dry color shift and is most noticeable with dark transparent pigments like alizarin and less noticeable with light opaque pigments like cadmium yellow. Our inhouse chemists are at the forefront of acrylic technology and use the latest acrylic resins available for Liquitex materials, providing you with the best wet clarity possible.

Acrylic paint films aren't keen on the extreme cold, so don't attempt to roll, unroll or flex acrylic paintings in temperatures below 45ºF as they will be more brittle.


Our dedicated health and safety compliance team put your needs first.

Read more

Starting a new project? Take a look at your options.

Read more

Formats that work together.

Read more

Understand the language of acrylics.

Read more